BUY NOW IN OUR ONLINESHOP: TRT800H-OLED
- Full featured, EASA/FAA certified Class 1 transponder and certified for VFR and IFR operation
- 4-line OLED display shows active and stand-by code, operating mode, flight level and flags
- Remote Control Unit TRT800RT available
- Operating Modes: Mode A/C, Mode S
- Extended Squitter, connection to GPS receiver with adapter cable, ADS-B ready (certification in accordance with ETSO-C166b pending)
- Integrated altitude encoder up to 35,000 ft
- Configurable energy saving mode especially for gliders
- Includes aircraft adapter with address memory for selection of ICAO 24-bit aircraft address, aircraft type and flight ID (for Mode S operation), memory for 8 data sets
The TRT800H-OLED is a standard transponder in 2¼” standard housing for all applications in general aviation from ultralight aircraft to gliders and piston engine aircraft.
It offers the classical A/C modes of operation plus full Mode S support including the future-oriented extended squitter function.
Advantages of this unit are an attractive price, small dimensions and a built-in altitude encoder without heating requirements.
These features help to reduce installation effort, cost and weight. The unit provides the required 25 ft altitude resolution.
The TRT800H-OLED may be used up to 35,000 ft actual operating altitude (not to be confused with maximum operating altitude) and a maximum true airspeed of 250 kn (463 km/h).
Using the Remote Control Unit TRT800RT the TRT800H-OLED can be fully remotely controlled. Especially glider pilots will appreciate the energy saving mode.
Technical Data
Abmessungen | 65 x 65 x 160 mm |
Gewicht | 580 g |
Versorgungsspannung | 13,8 V DC |
Stromaufnahme typ. | < 300 mA* |
Sendeleistung am Antennenausgang | 175 W |
Normen | EUROCAE ED-73C, CS-ETSO-2C112a / FAA TSO-C112c DO-181D Class 1, Level 2es, non-diversity TSO-C112c, 14 CFR part 21 subpart O |
Zulassung | EASA.21O.269, FAA TSO-C112c |
*Power consumption depends on interrogation rate.